Product Type | ITEM NO | Type | Characteristic | System |
Degassing Agent | 561PL | Phosphate esters | Remove and eliminate difficult-to-eliminate small air bubbles inside the paint film\PU epoxy two-component | W |
941PL | Remove and eliminate difficult-to-eliminate small air bubbles inside the paint film | W/S/UV |
Levelling Agent | PW336 | Acrylic | Prolongs the opening time of the paint film, which is beneficial to deaeration and drying, mirror effect, and no orange peel phenomenon | W |
PW363 | Prolongs the opening time of the paint film, which is beneficial to deaeration and drying, mirror effect, and no orange peel phenomenon,Paint film stays open longer. | W |
Wetting Agent | SW452 | Silicone | Low foam, low surface tension, alkali-resistant formula, more suitable for metal substrates | W |
X-074 | Cation | It has dispersing and degassing properties | W |
X-043 | Non-Silicone | It has degassing properties, good overall performance, and is more suitable for woodware | W/S/UV |
X-080 | Instead of 3777, non-silicon | S |
Dispersing Agent | A987 | Acrylic | Inorganic pigments and fillers are hydrophobic, improve water resistance, wash resistance, etc. You can use less thickener | W |
W578 |
| Inorganic pigments and fillers are hydrophobic, improve water resistance, wash resistance, etc. You can use less thickener | W |
W600 |
| Commonly used in both inorganic and organic pigments and fillers, carbonated titanium dioxide can be ground into a blue phase | W |
8907 |
| For organic pigments, good color display, instead of TOGO760 | W |
Rheology Additives | A300 | Acrylic | For heavy pigments, the addition of 1-3% content can prevent settling and is unlikely to increase the thickness. |
|
Anti-flash Rust Agent | 660B |
| It has good stability and can be added in the early stage | W |
670C |
| It has better moisture resistance and heat resistance than 660B, and is recommended for box paint | W |
680C |
| It has the function of rust transformation | W |
08B |
| Be used in acidic resins | W |
EVB |
| Can prevent corrosion inside the tank (Prevent in-tank corrosion in metal tanks without protective coating within 3-6 months) | W |
Odor Masking Agent | MAS FGR |
| The principle of mutual cancellation of odors and the principle of non-fragrance masking makes the odor more acceptable |
|
MAS BTMT |
|
|
MAS DS series |
| Reaction type |
|
Formaldehyde Capture Agent | TF501 |
| Reaction type, generally not released again, used in various water-based environments or used directly | W |