Flow And Leveling Additives

• Improves substrate wetting on challenging surfaces or dirty substrates, and 

enhances slip properties when used in combination with Borchi®

 Gol LA 2 or 

Borchi®

 Gol LA 232 

• Inhibits the formation of surface defects like craters and pinholes; VOC-free

• Reduces surface tension 

• Prevents pigment float and Bénard cell formation

• VOC- and APEO-free; recommended for challenging surfaces and dirty 

substrates in water- and solvent-based systems 

Borchi®

• Provides reductions in surface tension, improvements in the wetting process 

and low-foaming tendencies in formulations

• VOC-free; provides lowered surface tension as well as mar, scratch and 

block resistance

• Inhibits the formation of surface defects and improves final film appearance

50% in 

dipropylene 

glycol 

monobutyl ether

• Lowers surface tension and inhibits the formation of surface defects 

in non-polar surfaces

• Can be used in conjunction with Borchi®

 Gol LA 2 for better slip

• VOC-free; provides improvements in substrate wetting and block and 

scratch resistance 

• Quickly removes air bubbles from applied coated surfaces and avoids micro 

foam formation at all production stages

• VOC-free; provides reductions in surface tension, increases in surface slip 

and improvements in block and scratch resistance 

• Quickly removes air bubbles from applied films to provide smooth surfaces

• Specially designed for solvent-based coatings systems

• Provides improvement in substrate wetting and flow, as well as excellent slip 

without inter-coat adhesion interference

• VOC-free; provides excellent flow and a clear increase in the surface 

smoothness of paint films; good block resistance

• Prevents crater formation and largely prevents bleeding in hammer finishes

• VOC-free; recommended for top coats that are cured at room temperature 

and below 150 °C in solvent- and water-based systems, as well as solventfree systems

• Provides improvements in surface smoothness by reducing orange peel and 

preventing the formation of craters

• Contains no volatile organic compounds (VOCs); improves flow, leveling, slip and scratch resistance

• Inhibit the formation of surface defects such as shrinkage cavities and pinholes

• VOC-free; eliminates craters and other surface defects characterized by poor 

flow in can and coil coatings; stable up 

• Effective flow promoter and compatible with numerous organic binders

• Provides enhanced substrate wetting, lowered surface tension 

and block and slip resistance

• Inhibits the formation of surface defects

• Contains no volatile organic compounds (VOCs); improves flow, leveling, slip and scratch resistance

• Inhibit the formation of surface defects such as shrinkage cavities and pinholes